Skip Navigation

For more than 16 years, Cyient has been at the forefront of solving complex engineering challenges in rolling stock to create sustainable value for its global clients. We have successfully executed projects across various product families such as passenger trains, high-speed trains, locomotives, freight wagons, LRV, Monorail, and EMU/DMU. Operating across the entire design-build–maintain life cycle enables us to partner with our customers to deliver technologically superior products, achieve faster time-to-market, and deliver rolling stock projects in cost-efficient ways.

Cyient’s Rolling Stock Services and Solutions

Bid Support

Techno-commercial support such as system description for tender documents, gap analysis, (sub-) system supplier recommendations, and commercial execution optimization analysis for our customer’s bids.

Sub-System Engineering

End-to-end development across all phasesfrom conceptualization and feasibility studies across requirement and architecture, detailed design, testing, and integration to production maintenance.

Hardware and Firmware Development and Testing

Hardware development and testing across the life cycle including ASIC/FPGA design and redesign activities for cost/component optimization.

Technical Documentation

End-to-end technical documentation creation and management services (e.g., operator and maintenance manuals, animations, IPCs), including training material creation and training delivery.

Read More

Installation and Integration—Mechanical and Electrical

3D design and mock-up, analysis, space management, and integration (including build support and change management) across systems such as interiors, cab, HVAC, and underframe.

System Development

Software development and testing across life cycle for a range of (sub-) system such as TCMS, HMI, displays, ATE/ATB, or simulators.

RAMS

RAMS services as per EN 50126, EN 50128, and EN 50129 standards, including PHA, FMECA, RCM, FRACAS and RGA, and safety planning.

Development of Electronic, Mechanical, and Electro-Mechanical Products

Design, build, and maintain products as per customer specifications as one-stop solution owner.

Product Integration

In-house product integration lines for electronics products including facilities for testing and tie-ups for certifications and qualifications.

Electronics Manufacturing

Medium to high complexity and medium to high volume PCBA production with 8 SMT and 3 PTH lines from design verification, FAI and NPI to production, logistics, and end-of-life support.

Manufacturing Engineering Services

Optimizing and operationalizing manufacturing processes through methods engineering, fixtures and tooling design, and vendor development services.

Box Build

Value addition for electronics products through design for manufacturing, value engineering (cost, weight), and life extension support.

Cable Harness Assembly

Expertise in high-end interconnecting cables, cable assemblies, cable harnesses, electromechanical assemblies, co-axial cable assemblies, and custom jacketed molded cable assemblies.

Asset Management Solutions

Asset condition monitoring, asset management, and asset optimization solutions, involving asset data collection, processing, analysis and business enablement combining domain expertise and analytics capabilities.

Obsolescence Management

Proactive obsolescence monitoring and reactive management through part replacement and redesign (including value engineering).

Refurbishment

End-to-end refurbishment engineering activities including resuability analysis, re-engineering, retrofitment, and system integration.

Technical Documentation

End-to-end technical documentation creation and management services (e.g., operator and maintenance manuals, animations, IPCs), including training material creation and training delivery.

Read More

Development of Electronic, Mechanical, and Electro-Mechanical Products

Design, build, and maintain products as per market need or customer challenge—from specification development and conceptual design to manufacturing and maintenance.

Asset Management Solutions

Asset condition monitoring, asset management, and asset optimization solutions, involving asset data collection, processing, analysis, and business enablement combining rail expertise and analytics capabilities.

Product Localization

One-stop shop for product localization, including teardown analysis, value engineering, should costing, prototype build support, and manufacturing partner identification.

Cycero™ - Cyient Cab Event Response Output

Your one-stop cab event response device for a safer train journey.

Read More

Rolling Stock Engineering

Bid Support

Techno-commercial support such as system description for tender documents, gap analysis, (sub-) system supplier recommendations, and commercial execution optimization analysis for our customer’s bids.

Sub-System Engineering

End-to-end development across all phasesfrom conceptualization and feasibility studies across requirement and architecture, detailed design, testing, and integration to production maintenance.

Hardware and Firmware Development and Testing

Hardware development and testing across the life cycle including ASIC/FPGA design and redesign activities for cost/component optimization.

Technical Documentation

End-to-end technical documentation creation and management services (e.g., operator and maintenance manuals, animations, IPCs), including training material creation and training delivery.

Read More

Installation and Integration—Mechanical and Electrical

3D design and mock-up, analysis, space management, and integration (including build support and change management) across systems such as interiors, cab, HVAC, and underframe.

System Development

Software development and testing across life cycle for a range of (sub-) system such as TCMS, HMI, displays, ATE/ATB, or simulators.

RAMS

RAMS services as per EN 50126, EN 50128, and EN 50129 standards, including PHA, FMECA, RCM, FRACAS and RGA, and safety planning.

Manufacturing

Development of Electronic, Mechanical, and Electro-Mechanical Products

Design, build, and maintain products as per customer specifications as one-stop solution owner.

Product Integration

In-house product integration lines for electronics products including facilities for testing and tie-ups for certifications and qualifications.

Electronics Manufacturing

Medium to high complexity and medium to high volume PCBA production with 8 SMT and 3 PTH lines from design verification, FAI and NPI to production, logistics, and end-of-life support.

Manufacturing Engineering Services

Optimizing and operationalizing manufacturing processes through methods engineering, fixtures and tooling design, and vendor development services.

Box Build

Value addition for electronics products through design for manufacturing, value engineering (cost, weight), and life extension support.

Cable Harness Assembly

Expertise in high-end interconnecting cables, cable assemblies, cable harnesses, electromechanical assemblies, co-axial cable assemblies, and custom jacketed molded cable assemblies.

Services

Asset Management Solutions

Asset condition monitoring, asset management, and asset optimization solutions, involving asset data collection, processing, analysis and business enablement combining domain expertise and analytics capabilities.

Obsolescence Management

Proactive obsolescence monitoring and reactive management through part replacement and redesign (including value engineering).

Refurbishment

End-to-end refurbishment engineering activities including resuability analysis, re-engineering, retrofitment, and system integration.

Technical Documentation

End-to-end technical documentation creation and management services (e.g., operator and maintenance manuals, animations, IPCs), including training material creation and training delivery.

Read More

Products & Solutions

Development of Electronic, Mechanical, and Electro-Mechanical Products

Design, build, and maintain products as per market need or customer challenge—from specification development and conceptual design to manufacturing and maintenance.

Asset Management Solutions

Asset condition monitoring, asset management, and asset optimization solutions, involving asset data collection, processing, analysis, and business enablement combining rail expertise and analytics capabilities.

Product Localization

One-stop shop for product localization, including teardown analysis, value engineering, should costing, prototype build support, and manufacturing partner identification.

Cycero™ - Cyient Cab Event Response Output

Your one-stop cab event response device for a safer train journey.

Read More

Get in Touch